1 - 5 1/2" x 9 1/2' X .042' sheet of real abalone inlay material. Perfect thickness for inlay. 2 - sided material (no adhesive backing) made up of multiple pieces of abalone. Easy to cut with coping saw, router, bandsaw or similar tools. NOTE: This is not the thin veneer sheets sold by others.
1 piece - 9 3/4 x 11 3/4" x 1/8” thick sheet of translucent amber/yellow acrylic with dark polka dots for Epiphone guitar pickguards.
This is a very hard to find high-quality 1/8” thick translucent acrylic with the classic vintage Epiphone polka dot pattern seen on many pre-1970 acoustic and electric archtop guitars. Each sheet is enough material for three large pickguards like the Emperor, Triumph, Broadway and other models. see diagram for pickguard layout.
1 – sheet 6 1/2” 11 3/4” x 3/32”” acrylic sheet Brown Fire Stripe Sparkle pattern for guitar pickguards or as inlay. Comes with protective film on both sides.
Note: Exact pattern will vary from piece to piece.
Catalog:
1 – sheet 6 1/2” 11 3/4” x 3/32”” acrylic sheet faux abalone marble sparkle pattern for guitar pickguards or as inlay. Comes with protective film on both sides.
Note: Exact pattern will vary from piece to piece.
This is a very hard to find high-quality .105” extra thick (nearly 1/8") 100% real translucent celluloid with the classic vintage deep red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars and mandolins. 7" x 11” x .105” (280mm x 356mm x 2mm) - Large enough for multiple guitar pickguards like a Gibson J-50, Southern Jumbo, J-200, etc. (see diagrams). Perfect for bound and unbound elevated pickguards.
This is a very hard to find high-quality .105” extra thick (nearly 1/8") 100% real translucent celluloid with the classic vintage deep red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars and mandolins. 11” x 14” x .105” (280mm x 356mm x 2mm) - Large enough for multiple guitar pickguards like a Gibson J-50, Southern Jumbo, J-200, etc. (see diagrams).
1 piece - 7” x 11" x .03” (178 mm x 280 mm x 0.75mm) medium sized sheet of thin translucent celluloid tortoise shell for guitar pickguards.
This is a very hard to find high-quality .03” thick (Gibson spec) 100% real translucent celluloid with the classic vintage red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars. Each sheet is enough material for two large pickguards like a Gibson J-50 or four small pickguards similar to a Martin D-18 or OM, or a Gibson J-45 or L-00.
1 – sheet 9 3/4” 11 3/4” x 3/32”” light orange acrylic sheet with dark swirl pattern. Great for Gibson, Epiphone, Gretsch, Harmony guitar pickguards, and many more makes and models. Swirl pattern can vary a lot so sheets come in light or dark. Comes with protective film on both sides.
Note: Exact pattern will vary from piece to piece.
1 – sheet 9 3/4” 11 3/4” x 3/32”” dark orange acrylic sheet with dark swirl pattern. Great for Gibson, Epiphone, Gretsch, Harmony guitar pickguards, and many more makes and models. Swirl pattern can vary a lot so sheets come in light or dark. Comes with protective film on both sides.
