1 piece - 9 3/4 x 11 3/4" x 1/8” thick sheet of translucent amber/yellow acrylic with dark polka dots for Epiphone guitar pickguards.

This is a very hard to find high-quality 1/8” thick translucent acrylic with the classic vintage Epiphone polka dot pattern seen on many pre-1970 acoustic and electric archtop guitars. Each sheet is enough material for three large pickguards like the Emperor, Triumph, Broadway and other models. see diagram for pickguard layout.

1 – sheet 6 1/2” 11 3/4” x 3/32”” acrylic sheet Brown Fire Stripe Sparkle pattern for guitar pickguards or as inlay. Comes with protective film on both sides.

Note: Exact pattern will vary from piece to piece. 

Catalog: 

Pickguard Materials

1 – sheet 6 1/2” 11 3/4” x 3/32”” acrylic sheet faux abalone marble sparkle pattern for guitar pickguards or as inlay. Comes with protective film on both sides.

Note: Exact pattern will vary from piece to piece. 

This is a very hard to find high-quality .105” extra thick (nearly 1/8") 100% real translucent celluloid with the classic vintage deep red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars and mandolins. 7" x 11” x .105” (280mm x 356mm x 2mm) - Large enough for multiple guitar pickguards like a Gibson J-50, Southern Jumbo, J-200, etc. (see diagrams). Perfect for bound and unbound elevated pickguards.

This is a very hard to find high-quality .105” extra thick (nearly 1/8") 100% real translucent celluloid with the classic vintage deep red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars and mandolins. 11” x 14” x .105” (280mm x 356mm x 2mm) - Large enough for multiple guitar pickguards like a Gibson J-50, Southern Jumbo, J-200, etc. (see diagrams).

1 piece - 7” x 11" x .03” (178 mm x 280 mm x 0.75mm) medium sized sheet of thin translucent celluloid tortoise shell for guitar pickguards.

This is a very hard to find high-quality .03” thick (Gibson spec) 100% real translucent celluloid with the classic vintage red tortoise shell pattern seen on so many pre-1970 acoustic and electric guitars. Each sheet is enough material for two large pickguards like a Gibson J-50 or four small pickguards similar to a Martin D-18 or OM, or a Gibson J-45 or L-00.

1 – sheet 9 3/4” 11 3/4” x 3/32”” light orange acrylic sheet with dark swirl pattern. Great for Gibson, Epiphone, Gretsch, Harmony guitar pickguards, and many more makes and models. Swirl pattern can vary a lot so sheets come in light or dark. Comes with protective film on both sides.

Note: Exact pattern will vary from piece to piece. 

1 – sheet 9 3/4” 11 3/4” x 3/32”” dark orange acrylic sheet with dark swirl pattern. Great for Gibson, Epiphone, Gretsch, Harmony guitar pickguards, and many more makes and models. Swirl pattern can vary a lot so sheets come in light or dark. Comes with protective film on both sides.

1 – sheet 6 5/8” 11 ¾” x 1/8” acrylic faux white mother-of-pearl that’s great for inlay and guitar pickguards. This material looks like real opaque white MOP with slight pink and blue hues. Much easier to cut than real pearl with coping saw or band saw, and much less expensive. Comes with protective film on both sides.